How to Adjust Bike Spokes
Wheel rims must be periodically adjusted to maintain proper alignment. Improper alignment typically becomes apparent when a section of the rim begins rubbing the break pad during rotation. In order for the bike to function correctly, it will be necessary to true (align rim) the wheel. Truing may appear complicated, but with practice the process can be accomplished quickly and with little difficulty.
Table of Contents
Step 1
Remove the wheel from the bike and place it in the truing stand. Adjust the caliper arm of the truing stand so that the calipers are aligned with the rim wall and are approximately 0.5 centimeter away from the rim wall.
Step 2
Rotate the wheel to determine if the truing calipers touch the rim. If the rim touches at any point, loosen the calipers until the wheel rotates without touching. Spin the wheel again. As the wheel rotates, slowly close the calipers toward the rim until you hear the two touch. Locate the section of rim that touches the caliper as it rotates.
Step 3
Locate the appropriate spoke wrench for your particular wheel set. Using the spoke wrench, loosen the spoke located on the side of the rim that touched the caliper and tighten the opposite spoke. Make small adjustments to both spokes, only turning a quarter to a half a turn each time.
Step 4
Repeat Steps 2 and 3. Continue this process until the calipers are 1 to 2 millimeters from each side of the rim and the wheel rotates through the caliper without touching.
Company Profile
Romiter Group is a market leading designer and a manufacturer of bicycle spokes and motorcycle spokes making machine, which wins wide reputation for products with high efficiency, excellent reliability, easy maintenance and long lifespan.
We provides a complete bicycle and motorcycle spokes and nipple making solution, which includes Bicycle Spokes Making Machine, Bicycle Spokes Nipple Making Machine, High Speed Motorcycle Spokes Making Machine, Motorcycle Spokes Nipple Making Machine, Butted Spokes Making Machine, Bladed Spokes Making Machine, Wire Straightening Cutting Machine Machine, Wire Rivet Making Machine, Cycle Spoke Nipples Packing Machine, Ellipse-shaped Spoke Making Machine, Cycle Rim Making Machine etc.
